| phone : (215)679-8943 |
| 9 am to 5 pm eastern time |
| Now you can know if your Jake Brake is working correctly. |
| This is how our Jake Brake analyzer / monitor is wired. |
| If the brake is on low only one light will be lit. If it is on high both lights will be lit. When any one solenoid fails the light won't light. If there is a broken wire under the valve cover or anywhere else the light won't light. If there is bad connection the light won't light. |
| All of these problems can visually be detected, so even if you can't HEAR the difference, you can always SEE when the brake isn't operating properly. |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |